| Botenya | 1.2g/cm3 |
| Botenya | 1.8mm, 2mm, 2.5mm, 2.8mm, 3mm, 5mm, 10mm, 15mm, 20mm......ho fihla ho 500mm |
| Mmala | Mmala ofe kapa ofe o lokile, joalo ka ho hlaka, serame, opal, bosoeu, bokhubelu, boputsoa, botšo, botšo le bosoeu, bosiu le motšehare, seipone, joalo-joalo.Re ka boela ra etsa 'mala o hlophisitsoeng ho latela litlhoko tsa hau tse khethehileng. |
| Lintho tse bonahalang | 100% moroetsana Mitsubishi thepa e tala |
| Boleng | Lipampiri tsa rona tsa acrylic li lumellana le litifikeiti tsa CE / SGS |
| MOQ | 1 tonne kapa phalete e le 'ngoe ea lehong |
Khampani e hlahisa boemo bo ka sehloohong ba lefats'e ba ho lahla mela ea tlhahiso ea li-acrylic, 'me e sebelisa 100% lisebelisoa tse hloekileng tsa moroetsana ho netefatsa boleng bo botle ka ho fetisisa.Khamphani e na le nalane ea lilemo tse mashome e sebelisana le indasteri ea acrylic, 'me e na le sehlopha sa litsebi sa R&D.Tlhahiso ea rona ea feme kaofela e lumellana le maemo a machaba a ISO 9001, CE le SGS.
1) Phetiso e phahameng ho fihla ho 93%;
2) Boima bo bobebe: boima bo ka tlase ho halofo ea khalase;
3) Khanyetso e ntle ea boemo ba leholimo khahlanong le ho fetoha ha mebala le deformation;
4) Khanyetso ea tšusumetso e ikhethang: makhetlo a 7-16 a matla a ho hanyetsa ho feta khalase;
5) Ho hanyetsa lik'hemik'hale le mechine e babatsehang: ho hanyetsa acid le alkali;
6) Bonolo ba ho Feta: Letlapa la Acrylic le ka penta, la sireletsoa ka silika, la koaheloa ka vacuum, hape le ka sahoa, la chekoa le ho etsoa ka mochini ho etsa hoo e batlang e le sebopeho sefe kapa sefe ha se futhumatsoa ho isa boemong bo bonolo.
| Tšobotsi ea lishiti tse theko e tlaase tsa PMma / perspex polasetiki e entsoeng ka acrylic sheets | |
| Ponaletso e phahameng | Cast acrylic sheet ke ntho e ntle ka ho fetisisa e bonaletsang ea polymer, transmittance ke 93%.Hangata e tsejoa e le likristale tsa polasetiki. |
| Boemo bo phahameng ba mechine | Letlapa la Cast acrylic le na le matla a phahameng le ho hanyetsa tšusumetso ho makhetlo a 7-18 ho feta khalase e tloaelehileng. |
| Boima bo bobebe | Boima ba letlapa la acrylic le 1.19-1.20 g / cm³, 'me boholo bo lekanang ba thepa, boima ba eona ke halofo feela ea khalase e tloaelehileng. |
| Ho sebetsa habonolo | Ts'ebetso e ntle: e loketse ts'ebetso ea machanical le ho etsa li-termail. |
| E na le khanyetso e ntle ea corrosion ea lik'hemik'hale 'me e loketse ho khabisa bokaholimo joalo ka spaying, silkscreen printing vacuum evaporation coating. | |
| LETLOTLO | THUTO | VALUE | |
| MOEKETSI | Matla a Khoheli a khethehileng | - | 1.19-1.2 |
| Roswell Hardness | kg/cm2 | M-100 | |
| Matla a Shear | kg/cm2 | 630 | |
| Flexural Matla | kg/cm2 | 1050 | |
| Matla a tšepe | kg/cm2 | 760 | |
| Matla a Khatellang | kg/cm2 | 1260 | |
| MOTLATSI | Matla a Didlectic | Kv/mm | 20 |
| Bokaholimo ba Resistivity | Ohm | > 10 16 | |
| TŠEBELETSO | Khanya e fetisang | % | 93 |
| Refractive Index | - | ||
| MOTLATSI | Mocheso o khethehileng | Cal/gr℃ | 0.35 |
| Coefficient ea Thermal Cortductivily | Cal/xee/cm/℃/cm | ||
| Mocheso oa ho Etsa Mocheso | ℃ | 140-180 | |
| Hot Deformation Temp | ℃ | 100 | |
| Mocheso oa Katoloso ea Mocheso | Cmfcm/V | 6×10-5 | |
| MATS'OANEO | Ho Monyeha ha Metsi (24Hrs) | % | 0.3 |
| Teste | % | Ha ho letho | |
| Monko o monate |
